CNC Drill KD-812ZA

Description

KD-812 ZA 6-SIDED CNC DOUBLE DRILL MILLING CUTTER

DOUBLE UPPER DRILLING UNIT WITH MILLING UNIT - ATC LOWER DRILLING UNIT AND MILLING UNIT

Double CNC drilling for machining the 6 sides of the panel. Each of them composed of 3 drilling groups (2 upper and 1 lower), a total of 6 (4 upper and 2 lower), to carry out simultaneous work, guaranteeing greater efficiency. With linear magazine for 5 tools on board on each machine.

Both machines can work independently and synchronously to perform different types of drilling work on the panels.

REINFORCED STRUCTURE

Reinforced machine structure connected by means of a 3-axis system support beam, formed in a single operation, durable and robust, stable in operation.

WORKPIECE CLAMPS

Double clamp and long guide for fast work up to 140m/min.

For work with different table tops and safety mechanism. Equipped with cleaning blowers.

DESKS - WORKSTATIONS

The maximum working width on the main table is 1,220mm while on the additional working table the maximum width is 800mm. The minimum drilling space between 2 working groups machining simultaneously is 80mm.

MOBILE AIR CUSHION TABLES

Air cushion tables in two sections that move sideways, moving more flexibly according to the drilling position during the work to avoid scratching or damaging the workpiece or being damaged by the drilling head.

WIDTH DETECTOR FOR PARTS

Width detector equipped on the auxiliary work table, intelligently calibrates the position reference, guaranteeing efficiency.

POSITIONING BY MEANS OF PRECISION ALIGNERS

Lateral positioner on automatic loading table with movable positioning stop. Suitable for machining large panels, prevents the panel from sliding out of the guide.

Lateral aligner on air cushion table.

LAYOUT OF THE WORKING GROUPS

Each machine is composed of two upper heads of 16 vertical drills each (a total of 32 upper verticals per machine) and 6 horizontal drills each (a total of 12 horizontal drills per machine).

In its lower group it has 9 vertical drills (total of 18 drills between both machines).

Total number of boreholes: 106

In addition, each machine has an upper and a lower milling unit.

MILLING TECHNOLOGY

Structured milling device with double pressure plate (patented)

Improves milling accuracy and reduces panel scratches on the surface.

DOUBLE TOOL CHANGE

5+5 linear on-board gearbox with ISO30 linkage.

These tool magazines are located on board the machine units, which saves a lot of time when changing tools.

The main table has parking for aggregate.

With automatic movement for tool change

BARCODE READER SCANNER

A powerful scanner at the entrance of the line reads the label of the part where the work to be done is indicated on the surface of the board.

The drill will start working according to the instructions on the label.

PC CONTROL AND WORK SOFTWARE

PC control with CAD/CAM.

Not limited by the working surface of the panel and the grooving position, work without dead corners.

Processing log statistics: see the progress of production in real time.

Double CNC drilling lines

Enormous space saving to connect working lines with each other. The space between machines is just enough to allow access for tool changes, maintenance and adjustments. Safe and secure space for operators.

Example of a production line with 2 machines KD-812(Z)A

Example of a production line with 3 machines KD-812(Z)A

Technical Data

Minimum panel dimensions

250 x 50mm

Maximum panel dimensions

Main table: 2.800 x 1.220mm / Side table: 2.800 x 800mm

Panel width

Main table: 50 - 1.220mm / Auxiliary table: 50 - 800mm

Panel thickness

9 - 60mm

Panel length

250 - 2.800mm

Drilling units (each machine) Upper group: 32 verticals (16+16) + 12 horizontals (6+6) / Lower group 9 verticals ● Total 2 machines: 64 vertical upper + 24 horizontal + 18 vertical lower.

Power of milling machines

Upper milling unit: 5.5 kW (x2) ● Lower milling unit: 3.5 kW (x2)

Change of tools

5 + 5

Clamp speed

140m/min

Maximum X/Y/Z-axis speed

140/90/50

Suction intakes

4 openings of Ø200mm / 2 openings of Ø100mm

Total installed power

59.5 kW

Pressure

0.6Mpa

Overall dimensions

7.100 x 4.920 x 2.190mm

THE MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES WITHOUT PRIOR NOTICE.

The technical data and characteristics mentioned in this offer are of an informative nature and may be subject to modifications, updates and improvements.

Videos

Documents

Layout KD-812ZA