SANDER CALIBRATOR SECTIONED SIDEWALK SANDER KDt A9-1300QH

CALIBRATING SANDING MACHINE SECTION SANDER SKID SANDER A9-1300QH

FLAT SURFACE SANDER

  • Machine for production lines
  • Patines sectioned with SUPER FINISHER
  • Bands with variable speed and rotation reversal

WORK PROCESS

  1. Cross sanding belt SUPER

FINISHER 1

Electronic skate sectioned 60 segments

     2. Longitudinal sanding belt SUPER

FINISHER 2

Electronic skate sectioned 60 segments 

     3. 3M Scotch Brite roller

Diameter Ø200mm

    4. Cleaning roller

(OPTIONAL)

    5. Cleaning blowers

(OPTIONAL)

1. FEEDING TABLE

The conveyor table is fixed. Machine suitable for all types of automatic production lines.. Equipped with a 7.5kW vacuum system for workpiece clamping, very effective for small panel sizes and very smooth surfaces and also to improve the cleanliness of the conveyor belt.

The conveyor table has an automatic cleaning function. It reduces manual cleaning, increases efficiency, also prevents dust from sticking to the back of the panel.

2. MAXIMUM WORKING THICKNESS

Maximum working thickness up to 150mm.

3. TRANSVERSE AND LONGITUDINAL SECTIONED SKID

Electronically controlled 60-sector sectioned skid sanding system. The 1300mm wide panel can be divided into 60 areas, we can also control the sanding range through the intelligent system design.

The horizontal belt sander has a smart and labour-saving design, you can adjust the deflection of the sanding belt through a screw, it is easier than the traditional structure.

Superfinisher

Double belt device consisting of an inner lamellar belt for continuous support of the outer sanding belt, multiplying the contact surface, which adapts even more to the surface of the panel, achieving in the case of the transversal pad a greater roughing of irregularities, planning the surface of the panel to the maximum, leaving it in optimal conditions to achieve a better finish with a longitudinal sectioned pad as a final sanding unit.

Double belt device consisting of an inner lamellar belt for continuous support of the outer sanding belt, multiplying the contact surface, which adapts even more to the surface of the panel, achieving in the case of the transversal pad a greater roughing of irregularities, planning the surface of the panel to the maximum, leaving it in optimal conditions to achieve a better finish with a longitudinal sectioned pad as a final sanding unit.

Sanding belt equipped with oscillating blowers

The sanding belt has a reversible function, not only the motor can change direction forwards and backwards, but we have also designed a suction inlet system to collect dust and improve the sanding effect, for both forward and reverse sanding.

Detail of the suction inlet in both directions

5. POLISHING ROLLER

This machine has a 3M polishing roller with frequency control function which allows us to process a greater variety of materials with a better finish.

Maximum working width: 1300mm


Maximum working height: 150mm


Height of sanding table: 880-900mm


Feeding speed: 0-20m/min


Vacuum table absorption power: 7.5kW


Infeed conveyor belt cleaning system: Yes


Control system: PLC


First sanding unit 1: Electronic cross-sectioned skid


Power first sanding group 19kW with frequency inverter


Sanding unit motor 1 (inverter)With two-way direction


Dimensions of sanding belt 1:   5240×150


Felt band dimensions 1:   4850×140


Speed of sanding unit 1: 1-15m/s


Skid sectioned horizontally: 60 segments


Second sanding unit 2: Longitudinal sectioned electronic skid


Power second sanding group 211kW with frequency inverter


Sanding unit motor 2 (inverter)With two-way direction


Dimensions of sanding belt 2: 2620x1350mm


Lamellar band dimensions 2: 1720x1350mm


Speed of sanding unit 2: 1-8m/s


Longitudinally sectioned skid: 60 segments


Third unit with polishing roller (Scotch Brite): 1.5kW


Polishing roller speed +3M: 5-14m/s


Compressed air consumption: 10m³/h


Suction intakes: 6x150mm


Required average suction speed: 22-28m/s


Total power: 33.8kW


Dimensions (L x W x H): 3300x2200x2400mm


Main power supply: ≥6x10mm² (380V/50HZ)


Net weight: 4650kgs

Our machines

Related Products

Download our catalogue

Request your personalised quote