KD-868A CNC Drill
Description
KD-868A 6-SIDED CNC DOUBLE DRILL MILLING CUTTER
- DOUBLE UPPER DRILLING UNIT WITH MILLING UNIT
- LOWER DRILLING UNIT AND MILLING UNIT
Double CNC drilling for machining the 6 sides of the panel. Each of them composed of 3 groups of drills (2 upper and 1 lower), a total of 6 (4 upper and 2 lower), to carry out simultaneous work, guaranteeing greater efficiency.
Compatible to work with different nesting and design software.
Both machines can work independently and synchronously to perform different types of drilling work on the panels. Capacity up to 6.5 pcs/minute.
AUTOMATIC INFEED AND OUTFEED TABLES
The standard machine consists of automatic infeed and outfeed tables, in single operation or working in line with other machines.
WORKPIECE CLAMPS
Double clamp and long guide for fast work up to 140m/min.
For work with different boards and safety mechanism
DESKS - WORKSTATIONS
The maximum working width on the main table is 800mm while on the additional working table the maximum width is 650mm.
The minimum drilling space between 2 work groups machining simultaneously is 80mm.
MOBILE AIR CUSHION TABLES
Air cushion tables in two sections that move sideways, moving more flexibly according to the drilling position during the work to avoid scratching or damaging the workpiece or being damaged by the drilling head.
WIDTH DETECTOR FOR PARTS
Width detector equipped on the auxiliary work table, intelligently calibrates the position reference, guaranteeing efficiency.
POSITIONING BY MEANS OF PRECISION ALIGNERS
Lateral positioner on automatic loading table with movable positioning stop. Suitable for machining large panels, prevents the panel from sliding out of the guide.
Lateral aligner on air cushion table.
AUTOMATIC DETECTION OF PANEL MEASUREMENT IN X - Y - Z AXES
Full automatic precision part measurement system.
This makes machining easier and avoids possible errors.
Intelligent thickness reading through the clamps (Z-axis)
The lateral aligner reads
Photocells for precise reading of part length (X-axis)
LAYOUT OF THE WORKING GROUPS
Each machine is composed of two upper heads of 16 vertical drills each (a total of 32 upper verticals per machine) and 6 horizontal drills each (a total of 12 horizontal drills per machine).
In its lower group it has 9 vertical drills (total of 18 drills between both machines).
Total number of boreholes: 106
In addition, each machine has an upper and a lower milling unit.
BARCODE READER SCANNER
A powerful scanner at the entrance of the line reads the label of the part where the work to be done is indicated on the surface of the board.
The drill will start working according to the instructions on the label.
PC CONTROL AND WORK SOFTWARE
PC control with user-friendly CAD/CAM.
Intelligent AI optimisation system, automatically calculates the optimal processing path, and adds simulation effects.
Not limited by the working surface of the panel and the grooving position, work without dead corners.
Processing log statistics: see the progress of production in real time.
Optional - Extras
The standard machine is not equipped with these items unless otherwise stated.
SIERRA GROUP
Fast grooving by means of a disc.
It can groove from 50 to 850mm.
Technical applications
Examples of 6-sided work
Technical Data
THE MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES WITHOUT PRIOR NOTICE.
The technical data and characteristics mentioned in this offer are of an informative nature and may be subject to modifications, updates and improvements.
Videos
Documents
Our machines
CNC Drill KD-612KHZ
KD-868A CNC Drill
CNC Drill KD-812ZA
KD-812A CNC Drill
CNC Drill KD-612KHSZA
CNC Drill KD-612KHSZ
CNC Drill KD-612KHSA
CNC Drilling Machine KD-612KHS
CNC Drill KD-612KH
KD-612G CNC Drill
KD-610R CNC Drill
CNC Drill KD-610HZ
KD-610H CNC Drill
ES 
PT 
FR 
EN 
