Double gluing machine KE-2468JHSKA

Description

The machine can perform edgebanding synchronously, precisely and parallel on both sides. It is an ideal equipment to improve the productivity of mass production of furniture.

The panel width adjustment is structured by means of a heavy-duty double drive on sliding guides.

All machine settings are automatic and can be controlled via the touch screens.

UPPER PRESSURE BRIDGE

Constructed with a steel frame with double rows of rubber wheels mounted on bearings for agile linear movement of the workpiece and optimum clamping.

ENTRY GUIDE

With double support on linear guides and manual digital adjustment.

SWIVEL ROLL HOLDER

For the positioning of two PVC and ABS rolls up to a maximum thickness of 3mm.

An edge can be installed on the support. When the edge being used runs out, a sensor will detect it and turn on an alarm to alert the operator.

EDGE LOADER AND SHEARER

For fine edging rolls up to a maximum of 3mm. The machine is supplied with a rubber roller for use in rolls.

SUSPENDED CONTROL PANEL (TOUCHSCREEN)

From the touch screen, the main functions of the machine are controlled and all the operating units are started. Easy, fast and intuitive, thanks to its direct connection to the PLC.

NON-STICK SPRAY DEVICE

Spray system installed on the machine with dust-resistant nozzles. Glue residues are prevented from adhering to the workpiece.

TUPI GROUP AT THE ENTRANCE

Positioned before the gluing unit to rectify the edge of the board and eliminate chipping due to a bad cut, obtaining an optimum surface for gluing.

IR LAMP

Allows rapid heating of the panel face, improving the adhesion of the glue.

GLUE TANK GROUP WITH PREFUSOR

For EVA hot melt glue with fast heating. Digital thermo-regulator for glue tank temperature control.

With the PREFUSER device we achieve maximum glue utilisation under the best conditions.

PRESSURE ROLLER SET

Composed of five pneumatically pressurised rollers to promote the adherence of the edge to the workpiece.

SUCTION ENDOSUCTION UNIT

Precise rapid unit consisting of two motors for cutting the excess edge of the panel. With automatic positioner from the control panel with the possibility of changing the position of the motors from 0º to 15º.

DOUBLE EDGING UNIT

Consisting of a first roughing unit and a second fine trimming unit.

Both groups with automatic positioner from the control panel with the possibility of changing two edge sizes.

ROUNDING UNIT - MAXIMUM SPEED 18m/min

It allows the automatic rounding of the angles of the applied edge, without the need to stop the piece. This rounding device has the following main characteristics:

Optimum finishes, with the ability to adapt to different board profiles without special adjustments or device programming

SCRAPER GROUP OF SHAPES

For a perfect finish on PVC-ABS edges up to 3mm, eliminating all edge corrugations.

FLAT TAIL SCRAPER UNIT

Upper and lower tail scraper group.

Equipped with large diameter feeler discs.

Easy to clean swarf collection box inserted in the suction system.

CLEANING SPRAYS

Cleaning liquid. By applying the cleaner before the cloth polishing discs, loose glue residues are removed.

OSCILLATING PULECANTOS GROUP

Composed of 2 independent motors of 0,18kW working at 1400 RPM for easy cleaning and shining of the edge.

LOWER GROOVING UNIT

Pneumatic, automatic, horizontal grooving spindle moulder unit. Possibility of working in linear and automatic continuous operation with time-controlled exclusion from the screen.

Technical Data

Working height

9 - 60 mm

Edge thickness in coil

0,4 - 3 mm

Minimum board width

285 x 285 mm

Forward speed

13-18 m/min

Pressure pneumatic installation

0.6Mpa

Total installed power

44,84 kW

Voltage

400V 3 PH+T+N

Measures

7927x4300x1730

THE MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES WITHOUT PRIOR NOTICE.

The technical data and characteristics mentioned in this offer are of an informative nature and may be subject to modifications, updates and improvements.