Single-side gluing machine KE-396JB

UPPER PRESSURE BRIDGE

Built on a steel frame, it has a wide rubberised belt mounted on swivel bearings for agile linear movement of the workpiece and optimum clamping.

This group is positioned motorised and is displayed on the machine's screen.

ENTRY GUIDE

With double support on linear guides and manual digital adjustment.

SWIVEL ROLL HOLDER

With 650 mm diameter plate for the positioning of PVC - ABS rolls and pre-cut formica strips and strips with manual loading and automatic feeding.

SUSPENDED CONTROL PANEL (TOUCHSCREEN)

From the touch screen, the main functions of the machine are controlled and all the operating units are started. Easy, fast and intuitive, thanks to its direct connection to the PLC.

ANTI-ADHERENT SPRAY DEVICE (optional)

Spray system installed on the machine with dust-resistant nozzles. Glue residues are prevented from adhering to the workpiece.

TUPI GROUP AT THE ENTRANCE

Positioned before the gluing units to rectify the edge of the board and eliminate chipping due to a bad cut, obtaining an optimum surface for gluing.

This unit is composed of a first high speed motor for straight work. And a second tilting unit 0º-45º for milling the panel at the required angle.

EDGE BANDING UNIT, BOILER AND PRESSURE BOOSTING UNIT

Vertical motor with grooving cutter for the edge with folding effect. Teflon coated boiler for easy cleaning and fast heating (12 minutes).

The pressure unit is composed of pneumatic pressure rollers inclined to guarantee a perfect adherence of the applied edge.

SUCTION ENDOSUCTION UNIT

Precise rapid unit consisting of two motors for cutting the excess edge of the panel. With automatic positioner from the control panel with the possibility of changing the position of the motors from 0º to 15º.

SCRAPER GROUP OF SHAPES

For the perfect finish on sloping and straight edges, eliminating all edge undulations. The machine is mounted on the machine chassis with a highly rigid structure for vibration-free operation. The rotating copying units provide the correct position of the blades in relation to the cutting point. The machine incorporates mechanical digital indicators for easy adjustment.

FLAT TAIL SCRAPER UNIT

Upper and lower tail scraper group.

Equipped with large diameter feeler discs.

CLEANING SPRAYS (OPTIONAL)

Cleaning fluid. By applying the cleaner before the cloth polishing discs, loose glue residues are removed.

PULECANTOS GROUP

Composed of 2 independent motors of 0,18kW working at 1400 RPM for easy cleaning and shining of the edge.