Single-side gluing machine KE-496GH

UPPER PRESSURE BRIDGE

Built on a steel frame, it has a wide rubberised belt mounted on swivel bearings for agile linear movement of the workpiece and optimum clamping.

This group is positioned motorised and is displayed on the machine's screen.

MOTORISED ENTRANCE GUIDE

With double support on linear guides and Numerical Control. Automatic positioning from PC control.

UPPER PRESSURE BRIDGE

Constructed with a steel frame with double rows of rubber wheels mounted on bearings for agile linear movement of the workpiece and optimum clamping.

DOUBLE TROLLEY

Two mobile trolleys for the positioning of 2 rolls of PVC - ABS with manual feed.

EDGE LOADER AND SHEARER

For fine edging rolls up to a maximum of 3mm. The machine is supplied with a rubber roller for use in rolls.

Shear for cutting PVC and ABS up to 3 mm thick.

INDUSTRIAL PC MACHINE CONTROL

Simple operation and diversified functions, customised machining packs. Operators can select the machining programme that best suits their needs at the touch of a button.

On the industrial PC we can store an infinite number of working memories.

NON-STICK SPRAY DEVICE

Spray system installed on the machine with dust-resistant nozzles. Glue residues are prevented from adhering to the workpiece.

TUPI GROUP AT THE ENTRANCE

Positioned before the gluing unit to rectify the edge of the board and eliminate chipping due to a bad cut, obtaining an optimum surface for gluing.

DOUBLE IR LAMP

It allows rapid heating of the panel face, improving the adhesion of the glue, even in unfavourable environmental conditions of temperature and humidity.

DOUBLE PRESSURE ROLLER UNIT

Each group is made up of five rollers with continuous pneumatic pressure to promote the adherence of the edge to the workpiece.

HIGH SPEED CROSS LINKING UNIT

High speed working unit for cutting the excess edge of the front and back of the panel. The movement is carried out by means of prismatic guides and recirculating ball bearing slides that provide high precision and reliability in the work.

• Four high-frequency motors
• Vertical and front copying units with ground contact surfaces for maximum working precision
• Two-position work changeover system:

SWARF REMOVAL UNIT

This group traps the excess edge strip that has not been completely removed in the previous groups and prevents it from continuing to the edgebanding group, thus favouring a better finish.

FLAT TAIL SCRAPER UNIT

Upper and lower tail scraper group.

Equipped with large diameter feeler discs.

Easy to clean swarf collection box inserted in the suction system.

CLEANING SPRAYS

Cleaning liquid. By applying the cleaner before the cloth polishing discs, loose glue residues are removed.

DOUBLE PULECANTOS GROUP

Composed of 2 independent motors of 0,18kW working at 1400 RPM for easy cleaning and shining of the edge.

LOWER GROOVING UNIT

Pneumatic, automatic, vertical grooving and depth adjustable spindle moulder unit.

Possibility to work in linear and automatic continuous operation with time-controlled exclusion from the screen.

3.7 kW power.