KE-493G (40)

Single-side gluing machine KE-493G (40)

EDGE BANDING MACHINE KE-493G (40) DOUBLE KETTLE

HEAVY DUTY BEDPLATE

The bed of the edgebander is heavy-duty with reinforced ribs, which guarantees the exact positioning of all components for the entire service life and makes it more robust for stable, undisturbed operation.

UPPER PRESSURE BRIDGE

Made of steel, its strong support guarantees the best clamping of the workpiece.

Automatic positioning of the pressure bridge

Fast and accurate adjustment according to the thickness of the workpiece, reducing time and improving process efficiency.

DOUBLE ROLL HOLDER

With 650 mm diameter plate for the positioning of PVC - ABS rolls and pre-cut formica strips and strips with manual loading and automatic feeding.

EDGE LOADER AND SHEARER

For edging rolls up to a maximum of 3mm. The machine is supplied with a rubber roller for use on rolls.

Shear for cutting PVC and ABS up to 3 mm thick.

FEEDING SUPPORT FOR NARROW PARTS

Stable feeding with narrow workpieces to prevent the workpiece from slipping out of the guide, thus ensuring the best gluing results.

INDUSTRIAL PC MACHINE CONTROL

Where the start-up of all the operating groups is controlled, a digital thermoregulator to control the temperature of the tail boiler.

Easy, fast and intuitive, thanks to its direct connection to the PLC.

On the industrial PC we can store an infinite number of working memories.

NON-STICK SPRAY DEVICE

Spray system installed on the machine with dust-proof spray nozzles. The application of the special release agent prevents glue residues from sticking to the workpiece.

TUPI GROUP AT THE ENTRANCE

Positioned before the gluing unit to rectify the edge of the board and eliminate chipping due to a bad cut, obtaining an optimum surface for gluing.

DOUBLE IR LAMP

It allows rapid heating of the panel face, improving the adhesion of the glue, even in unfavourable environmental conditions of temperature and humidity.

DOUBLE TAIL TANK GROUP

2nd Gluing group

With complete equipment for EVA glue + Pre-fuser

1st Gluing group

With complete EVA glue equipment

GLUE TANK GROUP WITH PREFUSOR

For EVA hot melt glue with fast heating. Digital thermo-regulator for glue tank temperature control. Automatic reduction of the temperature of the unit.

With the PREFUSER device we achieve the maximum use of the adhesive and keep the glue tank in the best conditions for a longer period of time.

GLUE TANK

Accessory tank integrated into the chassis. When the pre-melter is empty, the system automatically sucks the glue to refill it. This system allows long edging runs without having to stop the machine at any time.

DOUBLE PRESSURE ROLLER UNIT

Each group is made up of 5 pneumatic pressure rollers, the first one motorised with a diameter of 100 mm and the rest are free conical rollers opposed to each other to guarantee a perfect adherence of the applied edge. Constant pneumatic pressure.

Photo with two pots with pre-melter for EVA glue.

A PUR glue pot does not need a prefuser.

SUCTION ENDOSUCTION UNIT

Consisting of two independent high-frequency motors for cutting the excess edge at the front and back of the panel.

Each motor is complete with a sensor to position the saw in relation to the cutting point. With automatic positioner from the control panel with the possibility of changing the position of the motors from 0º to 15º.

DOUBLE EDGING UNIT

Consisting of a first roughing unit and a second fine trimming unit.

Both groups with automatic positioner from the control panel with the possibility of changing two edge sizes.

4 MOTOR ROUNDING UNIT - MAXIMUM SPEED 24m/min

It allows the automatic rounding of the applied edge angles, at a speed of 24m/min, this rounding device has the following main features:

  • Power of 0.30 kW 18000 RPM.
  • Four high-frequency motors
  • Vertical and front copiers with ground contact surfaces for maximum precision in the work.
  • Two-position tool change function, for edges of different thicknesses.

DOUBLE SPOKE SCRAPER UNIT

For perfect finishing of PVC-ABS edges up to 3mm, eliminating all edge undulations. Automatic positioner from the control panel with the possibility to change two edge sizes.

FLAT TAIL SCRAPER UNIT

Upper and lower tail scraper group.

Equipped with large diameter feeler discs.

Easy to clean swarf collection box inserted in the suction system.

CLEANING SPRAYS

Cleaning fluid. By applying the cleaner before the cloth polishing discs, loose glue residues are removed.

DOUBLE PULECANTOS GROUP

Composed of 2 independent motors of 0,18kW working at 1400 RPM for easy cleaning and shining of the edge.

Working height
9 - 60 mm
Edge thickness in coil
0,4 - 3 mm
Minimum dimensions of the board
120 x 50mm
Board width
≥ 80mm; ≥ 40mm, L=≥300mm
Board length
≥ 40mm ; ≥ 200 mm
Forward speed
15-24 m/min
Pressure pneumatic installation
6 bars
Total installed power
26,94 kW
Voltage
400V 3 PH+T+N
Approximate measurements
9677x995x1960mm

THE MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES WITHOUT PRIOR NOTICE.

The technical data and characteristics mentioned in this offer are of an informative nature and may be subject to modifications, updates and improvements.

Our machines

Related Products

Download our catalogue

Request your personalised quote