Single-side gluing machine KE-706GB

This is an innovative, very easy and intuitive system designed to facilitate the work of the operator who, at the touch of a button, can change the thickness of the edge, perfectly adjusting the work units, greatly reducing the time spent on the adjustment and achieving excellent finishes from the first piece.

It also has an excellent aid for making the initial settings on the machine whenever a new type of edgebanding is added: the "fine control".

UPPER PRESSURE BRIDGE

Built on a steel frame, it has a wide rubberised belt mounted on swivel bearings for agile linear movement of the workpiece and optimum clamping.

This group is positioned motorised and is displayed on the machine's screen.

MOTORISED ENTRANCE GUIDE

Large, chrome-plated steel ruler, with double support on prismatic guides and servo-driven numerical control positioning.

Automatic positioning from the PC control.

DOUBLE SWIVEL ROLL HOLDER

With two plates to place PVC - ABS rolls and pre-cut formica strips, with manual loading and automatic feeding.

EDGE LOADER AND SHEARER

For fine edging rolls up to a maximum of 3mm. The machine is supplied with a rubber roller for use in rolls.

INDUSTRIAL PC MACHINE CONTROL

Simple operation and diversified functions, customised machining packs. Operators can select the machining programme that best suits their needs at the touch of a button.

On the industrial PC we can store an infinite number of working memories.

NON-STICK SPRAY DEVICE

Spray system installed on the machine with dust-resistant nozzles. Glue residues are prevented from adhering to the workpiece.

TUPI GROUP AT THE ENTRANCE

Positioned before the gluing unit to rectify the edge of the board and eliminate chipping due to a bad cut, obtaining an optimum surface for gluing.

IR LAMP

It allows rapid heating of the panel face, improving the adhesion of the glue, even in unfavourable environmental conditions of temperature and humidity.

DOUBLE PRESSURE ROLLER UNIT

Each group is made up of five rollers with continuous pneumatic pressure to promote the adherence of the edge to the workpiece.

Numerical control positioning system.

Self-adjusting mechanism.

Automatic pressure adjustment according to the different requirements of the gluing process.

SUCTION ENDOSUCTION UNIT

Precise rapid unit consisting of two motors for cutting the excess edge of the panel. With automatic positioner from the control panel with the possibility of changing the position of the motors from 0º to 15º.

CNC DOUBLE FINE TRIMMING UNIT

Consisting of a first roughing unit and a second fine edging unit. Both groups with automatic positioning from the control panel with the possibility of changing two edge sizes.

Automatic change of tool position by servomotor.

RADIO WIPER UNIT

For a perfect finish on PVC-ABS edges up to 3 mm, eliminating all edge corrugations.

Automatic positioning from the control panel by servomotor.

Exclusion from the group from the table

Automatic tool change

One-button changeover on the machine, intelligent and efficient operation.

Automatic changeover between R1- R2 scraper and adjustment by servomotor.

FLAT TAIL SCRAPER UNIT

Upper and lower tail scraper group.

Equipped with feeler discs.