Single-side gluer KE-468JSKGA (45)

UPPER PRESSURE BRIDGE

Constructed with a steel frame with double rows of rubber wheels mounted on bearings for agile linear movement of the workpiece and optimum clamping.

DOUBLE ROLL HOLDER

With 650 mm diameter plate for the positioning of PVC - ABS rolls and pre-cut formica strips and strips with manual loading and automatic feeding.

EDGE LOADER AND SHEARER

For fine edging rolls up to a maximum of 3mm. The machine is supplied with a rubber roller for use in rolls.

SUSPENDED CONTROL PANEL (TOUCHSCREEN)

From the touch screen, the main functions of the machine are controlled and all the operating units are started. Easy, fast and intuitive, thanks to its direct connection to the PLC.

NON-STICK SPRAY DEVICE

Spray system installed on the machine with dust-resistant nozzles. Glue residues are prevented from adhering to the workpiece.

TUPI GROUP AT THE ENTRANCE

Positioned before the gluing unit to rectify the edge of the board and eliminate chipping due to a bad cut, obtaining an optimum surface for gluing.

DOUBLE IR LAMP

It allows rapid heating of the panel face, improving the adhesion of the glue, even in unfavourable environmental conditions of temperature and humidity.

DOUBLE PRESSURE ROLLER UNIT

Each group is composed of four rollers with continuous pneumatic pressure to favour the adherence of the edge to the workpiece.

SUCTION ENDOSUCTION UNIT

Precise rapid unit consisting of two motors for cutting the excess edge of the panel. With automatic positioner from the control panel with the possibility of changing the position of the motors from 0º to 15º.

SCRAPER GROUP OF SHAPES

For perfect finishing of PVC-ABS edges up to 3mm, eliminating all edge undulations. Automatic positioner from the control panel with the possibility to change two edge sizes.

FLAT TAIL SCRAPER UNIT

Upper and lower tail scraper group.

Equipped with large diameter feeler discs.

Easy to clean swarf collection box inserted in the suction system.

CLEANING SPRAYS

Cleaning liquid. By applying the cleaner before the cloth polishing discs, loose glue residues are removed.

DOUBLE PULECANTOS GROUP

Composed of 2 independent motors of 0,18kW working at 1400 RPM for easy cleaning and shining of the edge.

NESTING PROBES

Set of styli essential for machining workpieces that have been previously machined using the nesting system on the upper side.