TALADRO CNC KD-610XHZ

Quickly drills vertical/horizontal holes, as well as hinges, half bores, through bores, etc. Can also be used for grooving and milling.

También puede realizar el trabajo de clavijado en las 3 caras del tablero.

Description

MOBILE AIR CUSHION TABLES

The air cushion table allows smooth sliding, moving more flexibly according to the drilling position of the boards during the whole process, avoiding scratches and other damages.

WORKPIECE CLAMPS

The grippers move at high speed, up to 140m/min, throughout the process to allow the entire workpiece to be machined. While one is lifted to move, the other firmly holds the workpiece to prevent it from moving.

PRECISION LATERAL ALIGNER

Lateral alignment mechanism: ensures greater accuracy during the process, as it is held against the panel surface throughout the process.

DOUBLE ALIGNMENT DEVICE

Fixed positioning by reference stop.

Suitable for small medium size boards, fast positioning.

Mobile positioning stop.

Suitable for machining large boards, prevents the board from sliding out of the guide.

AUTOMATIC DETECTION OF PANEL MEASUREMENT IN X - Y - Z AXES

Equipped with a complete automatic precision part measuring system.

This makes machining easier and avoids possible errors.

SIERRA GROUP

Fast grooving by disc. Can groove from 50 to 850mm.

UPPER AND LOWER DRILLING UNITS

Drilling process of the upper drilling unit together with the milling and sawing unit to increase production efficiency.

El grupo de taladros está formado por 13 taladros verticales y 10 horizontales en composición superior y 9 taladros verticales en su grupo inferior.

MILLING TECHNOLOGY

Structured milling device with double pressure plate (patented)

Improves milling accuracy and reduces panel scratches on the surface.

Machine equipped with two milling machines (one upper and one lower).

GRUPO CLAVIJADOR Y TOLVA DE ESPIGAS

La unidad de taladrado está equipada con una unidad de inserción de espigas en el eje R en el lado izquierdo, capaz de girar 270° para la inserción de espigas en tres lados.

Con almacén de espigas que suministra las automáticamente para ser posicionadas en el agujero taladrado.

VARIETY OF JOBS

Double-sided work and mirror function.

Simultaneous drilling of 2 panels. Milling and corner recesses.

Dimensiones mínimas de trabajo 70x30mm.

LINEAR TOOL CHANGE ON BOARD 5 POSITIONS

Possibility to install up to 5 different tools for different milling, grooving or laminating jobs.

With a 5.5 kW air-cooled milling motor. More power and higher speed.

Tool calibration sensor.

PC CONTROL AND WORK SOFTWARE

PC control with user-friendly CAD/CAM.

Intelligent AI optimisation system, automatically calculates the optimal processing path, and adds simulation effects.

MACHINE BED

Hardened welded monoblock frame to relieve all internal material stresses, very robust and machined on precision centres to ensure that all vibrations are absorbed and provide stability during machining.

Technical applications

Examples of 6-sided work

Application for LAMELLO slots, concealed fasteners and dowels

Vertical and lateral Lamello system

Side milling with milling cutter or saw

Slot for cabinet fittings

Technical Data

Board length

70 ~ 3.000mm

Board width

30 ~ 1.000mm

Working thickness

9-60mm

Minimum part dimensions

70x30mm

Diámetro de espiga

8mm

Longitud de espiga

20-45mm

Ancho de inserción de espigas

30-850mm (0º-180º)

30-740mm (90º)

Espesor de panel aplicable a clavijado

15-30mm

Change of tools

Linear on board 5 positions

Upper drilling unit

13V + 10H

Upper milling motor

5,5 kW

Upper saw unit

Yes

Lower drilling unit

9 V

Lower milling unit

3,5 kW

Maximum speed

X =140m/min, Y = 90m/min, Z =50m/min

Clamp speed

140m/min

Total installed power

22,3 kW

Pressure

0.6Mpa

Overall dimensions

5.270 x 2.954 x 2.336mm

Videos